China 15mm clear safety tempered glass manufacturer

Introduction

Toughened glass, also known as tempered glass, it is heated to 650 ℃ after annealing glass, sudden cooling and outer surface of the glass in high compression state, the nucleus, or center, of the glass is in a state of tension compensation.Therefore, as a safety glass, the strength, heat resistance and safety in use are important considerations.

Characteristics  

High strength 

The strength of tempered glass is 3-5 times that of ordinary annealed glass, and it has good bending and collision resistance.It can withstand 95Mpa of surface pressure.  

High safety 

After the tempered glass is broken, there will be alveolar particles with obtuse angles, which ensures the safety and harmlessness of human body. The toughening process greatly reduces the risk of thermal breakage and ensures less loss.  

High stability 

Toughened glass can withstand the temperature of 250 ~ 320 ℃, while the common annealed glass can only carry 20 ~ 100 ℃ temperature changes.

Specification

Size: Maximum 3000*8000mm, Minimum 150*300mm
Thickness: 3mm 4mm 5mm 6mm 8mm 10mm 12mm 15mm 19mm
Color: clear, ultra clear, green, blue, gray, bronze, etc.
Type: Clear, Tinted, Reflective, Low Iron, Etched, Textured, color painted, pattern screen printing, Color smart, Thermodynamic color and Low E glass, etc.
Processing: All the processing like beveling, cutting, drilling, etc. must be done before tempering.

Edge work

Any edges could be done perfectly, like flat polished edge (T edge), pencil edge (C edge), beveled edge, ogee edge, matt edge, corner round edge.

Holes and notches

Tempered glass can be supplied with drilled holes (no matter straight or conical) and cut notches. We will consider hole and notch locations and size according to your drawings. 

Shapes

Quality Standard 

Application