Safety tempered glass 10mm 12mm heat soaked toughened glass manufacturer China
As 12mm heat soaked testing glass, it is made by increasing the temperature of 12mm tempered glass up to 290℃±10℃, that’s reason that heat soaked tested glass also have the same characteristics and advantages of tempered glass. More

11.52mm heat soaking tempered safety glass is make up of 2 sheets of 5mm heat soak tempered glass and 1.52mm(4 interlayers) of PVB. It’s also named 11.52mm HST tempered laminated glass or 554 heat soaked safety laminated glass. More

12mm clear toughened glass, it is made from 12mm clear float glass by tempering processing as safety glass. All tempered glass have possibility for self-explosion. Building glass factory want to reducing the risk of spontaneous tempered glass breakage due to nickel sulphide inclusions within the glass of installed in a building. More

China factory safety tempered 17.52mm 21.52mm heat soaked toughened laminated safety glass
HST 88.4 1010.4 tempered laminated glass, 17.52mm 21.52mm heat soaked laminated safety glass, which is produced by 2pcs of 8mm/10mm heat soaked tempered glass with 4 layers of PVB interlayer or 2 layers of SGP interlayer. It is the most safety glass, soundproof, anti-UV, widely used for skylight, balustrade, curtain wall. More

Heat soak tested, HST, which is also called hot-dipping test or igniting test, refers to the method of re-heat-treatment after armoring, it is a method to avoid self-explosion effectively, which is a pane of toughened glass is subjected to temperatures of 280° for several hours over a specific temperature gradient, to induce fracture. More

Heat soaked test heat strengthened fully tempered toughened glass
Heat strengthened treatment is also called "detonation".The heat soaking treatment is to heat the tempered glass to 290°C±10°C,and holding definite times,to urge the nickel sulfide can quickly complete the crystal phase transformation in the tempered glass,so that the tempered glass which may be self-explosive after use,to artificially broken in advance in the factory’s heat soaked furnace. More

Hot soak treatment is commonly known as "premature burst". The tempered glass that may self-explode after use is artificially broken in advance in the factory's burning dip furnace, thereby reducing the self-explosion of tempered glass during use after installation.

More

Heat soak is a process that may expose Nis inclusions in tempered glass. The process involves placing tempered glass into the chamber and maintaining the temperature at about 290 °C. NiS inclusions may cause the tempered glass to spontaneously rupture without applying any load or thermal stress. Therefore, heat soak is the best way to solve spontaneous damage. More

Heat soak test glass is an additional process that is only applied to tempered glass. After tempering, the temperature rises again, the temperature rises to 280 ° C to 300 ° C, and then naturally cools after heating. If there are impurities, bubbles and other defective items on the glass, all of them will bleed, then after Heat soak test, the glass blew. The rate is almost zero. More

Heat soak test is also called"detonation." Heat soak test is to heat the tempered glass to 280 ° C± 10 ° C, and keep it for a certain time. Promote the rapid completion of crystal phase transformation of nickel sulfide in tempered glass, so that it can be self-explosive after the original use The tempered glass is artificially broken in the hot dip furnace of the factory in advance, thereby reducing thyself-explosion of the tempered glass in use after installation. This method generally uses hot air as a heating medium, called "Heat Soak Test",referred to as HST. Widely used for high rise glass facades, overhead glazing,balconies and balustrades. More