- Browse Categories
- Curtain Wall Insulated Glass
- Showerdoor Tempered Glass
- Laminated Tempered Balustrade Glass
- Laminated Insulated Skylight Glass
- Doors and Windows Glass
- Clear Tempered Glass
- PVB SGP Safety Laminated Glass
- Safety Tempered Insulated Glass
- Silkscreen & Digital Printing Glass
- Tempered Curved Glass
- Heat Strengthened Glass
- Acid Etched Frosted Glass
- Heat Soaked Glass
- Colored Tinted Glass
- Heat Reflective Glass
- Table Top Tempered Glass
- Certifications
-
- Subscribe
-
Get email updates on new products
- Hot Products
China Buildng Glass Factory CE Certificate 4-19mm Cut to Size Tempered Glass Price
- 1.Product name China Buildng Glass Factory CE Certificate 4-19mm Cut to Size Tempered Glass Price
- 2.Brand name KXG Glass
- 3.Size: Maximum 3000*8000mm, Minimum 150*300mm
- 4.Thickness: 3mm 4mm 5mm 6mm 8mm 10mm 12mm 15mm 19mm
- 5.Color: clear, ultra clear, green, blue, gray, bronze, etc.
- 6.Type: Clear, Tinted, Reflective, Low Iron, Etched, Textured, color painted, pattern screen printing, Color smart, Thermodynamic color and Low E glass, etc.
- 7.Processing: All the processing like beveling, cutting, drilling, etc. must be done before tempering.
China Buildng Glass Factory CE Certificate 4-19mm Cut to Size Tempered Glass Price
Introduction
Toughened glass, also known as tempered glass, it is heated to 650 ℃ after annealing glass, sudden cooling and outer surface of the glass in high compression state, the nucleus, or center, of the glass is in a state of tension compensation.Therefore, as a safety glass, the strength, heat resistance and safety in use are important considerations.
Characteristics
High strength
The strength of tempered glass is 3-5 times that of ordinary annealed glass, and it has good bending and collision resistance.It can withstand 95Mpa of surface pressure.
High safety
After the tempered glass is broken, there will be alveolar particles with obtuse angles, which ensures the safety and harmlessness of human body. The toughening process greatly reduces the risk of thermal breakage and ensures less loss.
High stability
Toughened glass can withstand the temperature of 250 ~ 320 ℃, while the common annealed glass can only carry 20 ~ 100 ℃ temperature changes.
Specification
Size: Maximum 3000*8000mm, Minimum 150*300mmThickness: 3mm 4mm 5mm 6mm 8mm 10mm 12mm 15mm 19mm
Color: clear, ultra clear, green, blue, gray, bronze, etc.
Type: Clear, Tinted, Reflective, Low Iron, Etched, Textured, color painted, pattern screen printing, Color smart, Thermodynamic color and Low E glass, etc.
Processing: All the processing like beveling, cutting, drilling, etc. must be done before tempering.
Edge work
Any edges could be done perfectly, like flat polished edge (T edge), pencil edge (C edge), beveled edge, ogee edge, matt edge, corner round edge.
Holes and notches
Tempered glass can be supplied with drilled holes (no matter straight or conical) and cut notches. We will consider hole and notch locations and size according to your drawings.
|
Glass edge to nearest point of hole |
Glass less than 1/2" thick should not have holes located any closer than 1.5 times the thickness of the glass. Glass thicker than 1/2" should not have holes located any closer than 2 times the thickness of the glass. |
|
Glass corner to nearest point of hole |
Holes should not be located any closer than 6.5 times the thickness of the glass. |
|
Dimension of holes |
The minimum dimension of a hole should not be less than the thickness of the glass. The maximum dimension of the hole should not be more than 1/3 the narrowest dimension of the piece. |
|
Notches and cutouts |
All must have a fillet with radius equal to, or greater than the thickness of the glass. |
Shapes
Quality Standard
Application
- Other Products
