The 12mm acid-etched tempered glass has the same safety as the transparent tempered glass, but is private due to its translucent finish. Which makes it a great choice for windows in sensitive spaces–certain office doors or windows, front entryways, laundry areas, bedrooms and bathrooms, etc. Acid etched glass lets light through while providing vision control. Acid etched tempered glass has a smooth surface, no fingerprints, and is easy to clean. More

10mm tempered glass can be made of tempered glass or laminated glass, which has extremely high safety and strength. For deep-groove processing of the railing glass, you can choose a transparent or colored option for our balcony, which is more aesthetically pleasing. Our tempered glass for railings is more durable and can be used for 5-10 years More

Curved tempered glass railing has been very popular in commercial application all the time.Curved tempered glass is manufactured through the process of heating, curving, and rapidly cooling the glass, which increases its strength by up to 5 times greater than normal float glass. More

Tempered glass is a safety glass which is used when strength, thermal resistance and safety are important considerations.It is fabricated by heating annealed glass to over 600°C and cooling it rapidly, which locks the outer surfaces of the glass in a state of high compression, and the core or center of the glass in compensating tension. More

5mm 6mm black tempered glass. It not only retains the advantages of dark grey tinted glass, but is also one of the safest glasses. Widely used as window glass, cabinet door glass, kitchen splash glass. More

Heat soak is a process that may expose Nis inclusions in tempered glass. The process involves placing tempered glass into the chamber and maintaining the temperature at about 290 °C. NiS inclusions may cause the tempered glass to spontaneously rupture without applying any load or thermal stress. Therefore, heat soak is the best way to solve spontaneous damage. More

Today, glass sunroofs are becoming more and more popular for use in architecture. It not only meets the energy efficiency required by society, but also makes the building look more attractive. You can choose the special design that suits your skylight: the shape can be a flat glass sunroof or a curved glass sunroof; the color can be transparent, green, blue, bronze, any color; safety glass can be used for laminated glass and laminated insulating glass. More

Tempered glass, also known as toughened glass. It is manufactured by heating the annealed glass above 600 °C and rapidly cooling it to produce the corresponding applied pressure. It is a safety glass that is used when strength, heat resistance and safety are important considerations.

More

Heat soak test glass is an additional process that is only applied to tempered glass. After tempering, the temperature rises again, the temperature rises to 280 ° C to 300 ° C, and then naturally cools after heating. If there are impurities, bubbles and other defective items on the glass, all of them will bleed, then after Heat soak test, the glass blew. The rate is almost zero. More

Heat soak test is also called"detonation." Heat soak test is to heat the tempered glass to 280 ° C± 10 ° C, and keep it for a certain time. Promote the rapid completion of crystal phase transformation of nickel sulfide in tempered glass, so that it can be self-explosive after the original use The tempered glass is artificially broken in the hot dip furnace of the factory in advance, thereby reducing thyself-explosion of the tempered glass in use after installation. This method generally uses hot air as a heating medium, called "Heat Soak Test",referred to as HST. Widely used for high rise glass facades, overhead glazing,balconies and balustrades. More

Curved tempered safety glass cuts the normal annealed glass into the required size and then heats it near softening point for rapid and uniform cooling. Curved toughened safety glass is annealed glass heated to softening point (650 degrees Celsius),according to a certain radius of the cool treatment, the surface strength doubled, the original flat surface becomes to curved surface of the glass. More